RESUMEN
Ultrafine hydraulic binder grout injection is a technique utilised for repairing masonry, either to connect sections, seal joints, or fill voids due to its great capacity for penetration and higher mechanical strength than lime grout. In this research, the mechanical properties of ultrafine hydraulic cement grout are analysed considering the influence of the mould material for preparing the specimens and their geometry characteristics in the context of the specifications set out in several international standards. The test campaign to ascertain compressive and flexural strength in different circumstances is supplemented with a physical and chemical characterisation of both binder and fresh and hardened grout. Significant differences in mechanical properties between specimens prepared with absorbent or non-absorbent-water material are found due to the influence of drying shrinkage and decanting binder during the curing process. Furthermore, the slenderness of specimens is presented as an important factor in determining the compressive strength of mixtures.
